Hot Water System Unexpected Failure: Taking the Right Steps

Hot Water System Unexpected Failure: Taking the Right Steps

Blog Article

Call Today

This post following next relating to What Would Cause My Electric Water Heater to Stop Working? is indeed attention-grabbing. Don't skip it.

Numerous modern houses utilize an electric water heater for their heating system, as a result of its ease as well as simplicity of use. However, just like any other electrical devices, troubles may occur with its usage, all of a sudden. It can be truly aggravating to wake up to a cool shower as opposed to a warm one or having your bath with water that isn't warm sufficient or even too warm. Whatever the situation may be, hot water heater issues can be quite nerve-racking. Luckily, we've made a list of feasible services to your water heater problems. There are a number of factors that can trigger many of these troubles, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you turn off the major power supply for security. Whatever the problem is, getting it fixed ought to not posture excessive of a concern if you comply with these actions:

Examine Your Power Supply:

As fundamental as this might seem, it is really required. Without ample power, your water heater will certainly not function. So the first thing to do when your water instantly stops working is to validate that it isn't a power problem. Examine if the fuse is blown out or the circuit breaker stumbled. If the circuit breaker is the problem, merely turn it off and on once again. Change any damaged or damaged fuse. Evaluate the device with power after these changes to see if it's now functioning.

Check the Burner in the Water Heater:

If it's not a power issue, after that attempt taking a look at your burner if it is still working. Evaluate each of your burner to be sure the issue isn't with any one of them. If any one of them is defective, change that component and afterwards check whether the hot water is back on.

Inspect Your Thermostat:

If your water heater still isn't functioning or the water coming out isn't hot sufficient, you might need to check the temperature level setups on your upper thermostat. Make certain the circuit breaker is switched off prior to doing anything. Open up the accessibility panel as well as press the red switch for temperature level reset above the thermostat. This ought to assist warm the water. Transform the circuit breaker back on and check if the trouble has actually been fixed.

Call A Specialist:

If after changing all faulty parts as well as resetting your temperature level, the hot water heater still isn't functioning, you might require to speak to an expert plumber for a professional opinion. The issue with your heating unit could be that the hot and cold taps have been changed or it might be undersized for the amount of hot water needed in your home. Whatever the situation might be, an expert plumber would certainly assist fix the issue.

Final thought

Hot water heater issues are not constantly major. Much of them result from small problems like a blown fuse or worn-out heating element. Replacing the defective parts ought to work. However, if you are still unable to solve the problem, give a call to your local plumber ahead to get it dealt with.

8 possible reasons why you have no Hot Water

Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.

Water Leak

Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.

Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.

Gas Heater: Gas Leak

If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.

Gas Heater: Pilot Light Problems

There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.

Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.

Gas Heater: Faulty Thermocouple

The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.

Electric Heater: Breaker Blues

Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.

Electric Heater: Reaching The Limit

If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.

Electric Heater: Heating Element

If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/

I was shown that editorial about Hot Water Heater Repair from an associate on a different web property. Liked our write-up? Please share it. Help others check it out. We thank you for reading our article about How to Troubleshoot and Repair an Electric Water Heater.

For fast relief, call!

Report this page